CTX 1300 Forum banner
1 - 20 of 20 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
This is the best cell phone/gps holder I have found. I have had Techmount products in the past on several bikes and was always blown away by the quality. I'm using mine primarily for my cell phone as I stream satellite radio through the blue tooth.TECHGRIPPER.COM It is very solid and holds the devise securely.
 

Attachments

·
Registered
Joined
·
1,205 Posts
Which model you have for the CTX1300?
 

·
Registered
Joined
·
227 Posts
Worst website ever. Takes forever for anything to load. Trying to find a mount that will work for my GPS, but can't seem to find any info regarding how far these open.
 

·
Registered
Joined
·
406 Posts
Have you tried RAM mounting devices? You can search on it for the specific device you have and see what comes up. This one looks good. I've used RAM mounts, and currently have one, or I make my own.
This has been my experience over the years for all my gadgets. RAM will have what you need and you can adda telexnet bar to your handlebars and you can add a string of ramssecurely
 

·
Registered
Joined
·
227 Posts
I figured that, but I need to know how far it opens. My GPS is larger than the one in this pic.
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #14 ·
I posted a pic it's on the first page of this thread. It's slightly larger than 4 inches
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #15 ·
That tablet looks pretty big I don't think it would fit. I like the set up you have now.
 

·
Registered
Joined
·
227 Posts
I saw that pic. That phone is just a tad under 3" wide. I have one. My GPS is just a tad under 4" tall and I just need to know if that gripper will open that wide.
I am going to try their website again a little later and see if it will respond faster. It was a pig earlier today taking 3 to 5 minutes just to open a link to one of their pages. And, no, I am not on a 96 baud modem. I have a superfast internet connection. Their site just sucks.
 

·
Registered
Joined
·
227 Posts
Stupid website doesn't even tell you how far it opens. Just lists a bunch of phones that it will fit. What if I don't have one of those phones and need to see if it will fit the one I have. Why can't they just put one stupid dimension on the description page along with all the other dimensions?

I don't care how good it is, I don't want one now. RAM makes plenty that will work.
 

·
Super Moderator
Joined
·
5,721 Posts
I saw that pic. That phone is just a tad under 3" wide. I have one. My GPS is just a tad under 4" tall and I just need to know if that gripper will open that wide...
You saw some of the pics but did you see THIS pic and post?

But you may be right. The RAM mount system will have something for just about every device that can be used in/on any vehicle. From police cars, boats, semi trucks, motorcycles, etc. And from GPS units, smart phones, spot devices, and laptops, etc. And you can usually find the model needed on Amazon too. So if this web site refuses to cooperate...
 

·
Registered
Joined
·
227 Posts
Nope. Missed that one somehow. That would work. Might look at it because some of the RAM stuff is pretty pricey.
 
1 - 20 of 20 Posts
Top